Low-temperature steam formaldehyde sterilizer

Model：YSMJ-JQ150

<!--[if !supportLists]-->一、<!--[endif]-->the basic information of the product

<!--[if !supportLists]-->1. <!--[endif]-->Briefly

u Product name: Low temperature steam formaldehyde sterilizer

u Model: YSMJ-JQ150

u Device Category: Class II Registration

u

2. Size

u Dimensions: (length×width×height) 1070×790×1770mm

u Sterilization chamber size: (length×width×height) 820×465×400mm

u Total volume: not less than 150L

u Effective volume: not less than 120L

u Weight: 345Kg

3. Key Usage Information

u Sterilant: 2% formaldehyde, 3% alcohol and 95% distilled aqueous solution

u Packaging specification of sterilant: 2L

u Single cycle dosage: 0.6~1.3Kg

u Operating temperature: 60°C and 76°C

u Sterilization time: 2~3.5 hours

u Energy consumption: ≤12 kWh/per pot

u Water consumption: 3.95Kg/min (this is laboratory data)

4. Use Environment

u Power supply: AC380V±38V, 50Hz±1Hz

u Power: 5.3kVA

u Ambient temperature: 5~40°C

u Relative humidity: not more than 85%

u Atmospheric pressure range: 70Kpa~106Kpa2

5. Miscellaneous

u Heating method: electric heating

u Operating temperature: 60°C and 76°C

u Maximum pressure resistance: 5pa

u Operating height: ≤160cm

<!--[if !supportLists]-->二、<!--[endif]-->the basic performance parameters of the product

1. Uses

It is used for low-temperature sterilization of heat-sensitive items, and can be used in operating rooms, supply rooms, and endoscopy rooms of medical institutions

as well as other treatment rooms.

2. Materials

u Cavity material: 5052 high-quality corrosion-resistant aluminum alloy is used, and advanced anti-oxidation treatment is adopted

In terms of superior thermal conductivity, the corrosion resistance of the inner cavity is strengthened.

u Box material: made of ABS material, high strength, heat and flame retardant, and the product is safer.

u Door panel material: 5052 high-quality corrosion-resistant aluminum alloy with anti-oxidation treatment;

≥ 10mm, which greatly improves the ultimate compression resistance.

u Pipe material: SUS304 stainless steel, sanitary pipe and clamp connection, can provide related

Supporting materials.

u Thermal insulation material: high-quality thermal insulation cotton, with low thermal conductivity, good fire performance, strong anti-aging ability,

Non-toxic, environmentally friendly and high-grade appearance, soft texture and other characteristics to ensure uniform temperature performance.

3. Structural appearance

u Cavity structure: The cavity structure is rectangular, which increases the use of space in the cavity, and the thickness of the cavity is ≥8mm

High pressure resistance ≤ 5pa.

u Structural framework: SUS304 stainless steel wire drawing plate is used to build the main body, which has a strong structure and excellent structure

show anti-rust properties.

u Movable caster: Thermoplastic high-strength polyurethane is used as the base wheel material, with stop function, moving smart

Live and good resistance to shock, abrasion and chemicals.

u Movable door structure: The electric lifting door driven by the push rod is adopted, and the uniform moving speed increases the operation security.

4. Operation & Loading3

u Operating height: The operating height is not more than 160cm, and the operating height is reduced, taking into account the convenience of women

Operation, more user-friendly.

u Loading method: movable stainless steel basket with support rod to avoid stacking of items.

u Loading space: no less than 79×42×36 CM (length, width and height)

u Operation interface: high-precision industrial touch screen, new appearance design, 262K color, finer picture quality

Greasy and targeted design of proprietary interactive interface, the new display method not only brings lower energy consumption, but also creates

Humanized interaction with family members optimizes user experience.

5. Control system and function

u Control system: Siemens PLC control system and friendly human-computer interaction interface, safe and reliable;

One-button start to end, the whole process is completed automatically, displaying temperature, pressure, sterilization time and other information, system

Maintenance upgrades are available. u Heating system: The thermostat control module is adopted, and the PID algorithm is used to control the temperature more accurately and stably.

Control the temperature of the door, inner tank, steam generator, etc., and ensure their working stability.

u Display function: can display temperature, pressure, time, operation mode and alarm information, etc.

u Power-off memory function: reduce the operation cost and the risk of misoperation.

u Steam generator: self-developed rapid evaporator, which not only improves the vaporization rate of formaldehyde solution, but also improves the vaporization rate of formaldehyde solution.

It also enhances the sterilization effect.

u Washing and drying function: add automatic cleaning and drying function independently, which is the basic requirement to ensure that the bag is not wet

, greatly reduce the amount of formaldehyde residue in the treated items, and ensure that it is lower than the national calibration value.

u Automatic dosing function: unique formaldehyde solution soft bag filling technology, automatic puncture filling, avoid over-filling

The risk of multiple human involvement.

u Printing function: It can print the program name, sterilization date, sterilization pot, and sterilization start and end

Information such as pressure, temperature, and stage time at each stage of the sterilization process are kept in printed records for more than 5 years.

In order to facilitate the traceability of the hospital.

u Storage function: no less than 15,000 pots of sterilization data storage, storage information including program name,

Sterilization date, number of sterilization pots, sterilization start and end time, pressure, temperature, and stage of each stage of the sterilization process

Information such as time and end status.

u Alarm system: There is a high temperature alarm system.

u Network connection: There is a network connection port.

6. Operating Mode

u Set up two sterilization modes: 60°C sterilization and 76°C sterilization.

7. Safety Performance

u The door of the sterilization chamber is driven by an electric push rod, and an anti-pinch device is added to avoid accidental injury to the operator.

u Multiple protection functions: with multiple protection functions such as over-voltage, under-voltage, over-temperature, door failure, etc., to ensure

Safe to use.

u Negative pressure working system, eliminating the risk of formaldehyde leakage during sterilization, safer and more reliable.

u Perfect safety automatic monitoring function to ensure the safety of operators and products.

u Set up door safety interlocking device to prevent uncontrollable risks caused by illegal operation.

u The equipment has a safety performance inspection report, and a copy of the inspection report can be provided and stamped with the manufacturer's company

Chapter.

u The product is immune to conducted emission, radiated emission, electrostatic discharge (ESD), radio frequency electromagnetic field radiation

Degree, electrical fast transient pulse group, surge, power line voltage sag, short-term interruption and voltage change and other items are checked

The inspection is in accordance with the corresponding provisions of GB/T18268.1-2010, and a copy of the provincial inspection report can be provided and stamped for production

The official seal of the enterprise.

8. Electrical components

u Human-computer interface: well-known brand 8-inch color touch screen, communication rate≥19.2Kbps;

u Central processing module: German Siemens controller, stable and reliable;

u Vacuum pump: German water ring vacuum pump, reliable quality, not only to meet the design pressure of the sterilizer

demand, and to a certain extent, accelerate the decomposition and absorption of formaldehyde vapor, and the safety factor is higher.

u Air filter: filtration accuracy≤0.22μm;

u Pressure sensor: The built-in pressure sensor adopts a high-precision sensor to automatically detect the pressure in the cavity.

Ensure that the accuracy of the pressure in the cavity is controlled within the effective range.

u Temperature sensor: The embedded temperature sensor automatically detects the temperature in the cavity to ensure the accuracy of the temperature in the cavity

Control within the effective range.

三、Key performance parameters of the product

1. Sterilization ability

★ Strong sterilization ability: stronger penetration and stability than hydrogen peroxide, no lumen size limit;

2. Formaldehyde residue control5

★ In the desorption stage, formaldehyde is removed from the sterilizer and on the sterilized items, and the process ensures that the items are sterilized

The average calculated value of the sample must not exceed the same batch of sterilized articles being inspected when removed from the sterilizer

200 μg, and the residual amount of any sample taken separately must not exceed 400 μg.

3. Safety performance

★ Formaldehyde is not corrosive to sterilized items and has little damage to items;

4. Network and traceability system

★ It is equipped with a network connection port, which can realize real-time recording and storage of machine operation and tracking equipment

Intelligent management of traceability system.

5. Electromagnetic compatibility

★ Electromagnetic compatibility test reports from testing institutions at or above the provincial level can be provided.

6. Intellectual Property

★ The product has 1 design patent, and a copy of the patent certificate can be provided with the official seal of the manufacturer.

★ The product software has the China Computer Software Copyright Registration Certificate, and a copy of the certificate can be provided for stamping

The official seal of the manufacturer.

★ System certifications: 9001 and 13485 quality certifications, 14001 environmental and 45001 health system certifications.